Deep Well Hand Pumps

Approx. Rs 14,500 / UnitGet Latest Price

Product Details:

This IM III Deep Well Hand Pump is known as VLOM 65(2.5 inch) and  VLOM50(2") which is suitable for village level operational maintenance, the above ground structure is same as I M II Deep Well Hand Pump, it is used for lifting water from deep set bore holes covering Static Water Level (SWL) that ranges from 20 meters to 30 meters.

Set of hand pump assemby consists of:

• Pump head
• Handle assy. fixed with bearings (2 Nos.)
• Chain with coupler assy
• Third plate (Intermediate Flange)
• Water tank assembly with 50mm NB Riser pipe holder
• Connecting rod mild Steel Electro GALVANIZED  (10 Nos.) Optional stainless steel con.rods (10 Nos.)
• Stand assembly normal Optional stand assembly telescopic
• Compression cone plate
• Compression rubber cone-Nitrile
• Riser pipe 50 NB (2” NB) (10 Nos)
• Riser pipe centralizer (5 Nos.)
• Cylinder assy. OTC (Open Top Cylinder)

Approx. Rs 19,500 / PieceGet Latest Price

Product Details:

This Hand Pump is widely used in rural areas  it is commonly called  India Mark II Deep Well Hand Pumps. In this pump the connecting rod and riser pipe will be of three meters long each.

Note : Range avaliable between Rs.8100 to 23000

Hand Pump Consist Of:

• Pump head Hot Dip Galvanized
• Handle assembly, fixed with bearings (2 Nos.)
• Chain with coupler assembly
• Third plate (intermediate flange)
• Water tank with 32mm NB (1-1/4”) riser pipe holder
• Connecting rod MS Electro Galvanized (10 Nos.) Option-stainless steel con. rods (10 Nos.)
• Cylinder assembly (CI body fitted with brass liner
• Stand assembly
• Option-telescopic stand assembly
• Set of Hex bolts and buts
• Riser pipe 32mm (1.1/4) NB with socket (10)

Approx. Rs 14,500 / UnitGet Latest Price

Product Details:

We are one of the leading manufacturer and supplier of the comprehensive range of Extra Deep Well Pump. The product is the result of the hard work of our team of experts, who specially designed the product for the rural/unskilled operation and are apt for depths of up to 90 meters. These Deep Wells are fabricated using high grade steels, and have heavier handle with a t-bar and additional weight ensures reduced pumping efforts.

Note : Range avaliable between Rs.11000 to 23000

Approx. Rs 18,500 / PieceGet Latest Price

Product Details:

With the experience acquired by UNICEF in association with UNDP, World Bank water and Sanitation Program in partnership with hand pump field workers and developmental organizations, it has designed the Deep well hand pump that has become a choice in number of countries across Africa and Asia.

Note: If the hand pump is used for dug wells, then the suitable provision must be made for location, the rising mains and to modify the suction pipe if required. A concise description of the pump sub-assemblies and components are as under.

Components:

Pump head

Handle front

Handle rear

Rod hanger

Rod hanger pin

Fulcrum pin

Bearing bushes inner & outer with cover

Approx. Rs 11,000 / Piece(s)Get Latest Price

Product Details:

 Features :

• The Chain Link conversion head is made of galvanized steel and is  equipped with double-sealed flange bearings.   Flange bearing are used for the handle support.
• The spout of the water tank shall be made of 2 inch nominal diameter pipe. The pipe holder in the water tank shall be welded to a smaller flange. Adequate sealing is provided.
• The pump body shall have a base plate with four foundation bolt holes exactly 9 inches square (i.e. 228.6mm) and a diameter of 20mm (Bore size) to conform to the CWSA Ghanaian standards.
• The pump stand will be fixed on a ground fixing assembly with a suitable rubber gasket The foundation bolts shall be of ø 16mm, length 160mm with at least 30m thread at the upper end. The foundation bolts are welded on a frame of steel rods. The four ø 16mm, length 160mm foundation bolts have to fit the above mentioned foot flange. The ground fixing assembly has to be brought in position in the fresh concrete, so that a minimum of 30mm of thread remains out of the concrete.
• Riser Pipe with tip-stretched (not welded-on) spigot (male end) and socket (female end), for connection purposes furnished with male/female Rope Thread at pipe and  to avoid wear and tear between the rods and pipes during operation a centralizer is to be provided
• The 10.8 mm dia stainless steel pump rods for the connection to the above mentioned GMIMKII reciprocating hand pumps shall have rolled on threads.The full brass pump cylinder shall be assembled for the employment together with the above – mentioned components that are the above ground system the lightweight riser pipes and stainless steel pump rods.

Approx. Rs 15,500 / PieceGet Latest Price

Product Details:

The Extra deep well hand pump set consists of the followings :

• Pump head
• Heavier sq. Section (40mm) handle Assembly fixed with bearings (2 Nos.), T-Bar and (3 nos.of triangular counter weights)
• Chain with coupler
• Third plate (intermediate flange)
• Water tank assy. with 32mm (1-1/4”) R.P.Holder
• Stand assy. normal
• Optional telescopic stand assy.
• Connecting rod, mild stl. Electro Galvanised (10 Nos.) Option-connecting rod SS (10 Nos.)
• Riser pipe 32 mm (1 ¼”) NB with socket (10 Nos.)
• Set of hex bolts and nuts.